3D Print Timelapses for July 2020

Here's a compilation of the 3D print timelapses I did for July.



All 4 were printed on my Prusa I3 MK2.5 with the following filaments.

Rainbow Silk PLA
ProtoPasta Galactic Empire Metallic Purple HTPLA

N64 Logo Display Stand

Beer/Soda Cozy
https://www.thingiverse.com/thing:3440555

Wine Holder
https://www.thingiverse.com/thing:4550344

Weird Twisty Vase
Designed by GeekyFayeArt
https://www.thingiverse.com/thing:4544012

Happy Printing! 

3D Print Timelapses for May 2020

Here's a compilation of the 3D print timelapses I did for May.



All 3 busts were designed by David Östman and can be found on MyMiniFactory.

All 3 were printed on my Prusa I3MK2.5 with various PLA filaments.

Deadpool
Printed with Rainbow Silk PLA

Darth Vader
Printed with Empire Strikes Metallic Black HTPLA from Proto-pasta.

Thanos
Printed with purple silk PLA.

Happy Printing!

3D Printing Timelapse Rose & Vase

Happy Mother's Day! My mother generally thinks flowers are a waste of money since they die so soon. Totally an Asian thing isn't it? So my solution was to 3D print her a rose and vase that will last much much longer. 

Printed on my Prusa I3 MK2.5

Rose Stl:

https://www.thingiverse.com/thing:316812

Spiral Vase Stl:

https://www.thingiverse.com/thing:550604

Proto-Pasta Candy Apple Metallic Red HTPLA (Rose)

https://www.proto-pasta.com/collections/sparkly-htpla/products/glitter-flake-htpla-v2-candy-apple-red

Silk Rose Red PLA (Vase)

https://www.amazon.com/gp/product/B07CBN28K9/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1

Silk Multicolored Rainbow PLA (Stem)

https://www.amazon.com/gp/product/B07VH441CX/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

Rainbow Vases!

I recently bought some rainbow filament to try out, mainly because I wanted to print some vases and get a cool color gradient effect. And it totally works, as long as you're using over 10 meters of filament. My first print came out in one solid color as it only used almost 9 meters of filament. But the three print above all used somewhere between 12 & 15 meters of filament which provided some nice color changes.

I used Silk Multcolored PLA filament from Amazon and printed these at .20mm layer height at 215 C for the first layer, 210 C the rest, bed temp at 60 C on my Prusa I3 MK2.5. And if you're interested in these vases, you can check them out on Thingiverse:

Curved Honeycomb Vase

Spiral Vase

Spiral Vase

This is definitely the shiniest filament I've used and I have some silk gold PLA as well that I'm going to try out next so stay tuned!