Pages

Thursday, May 26, 2016

Destiny Hunter Knife Project


I made a thing! Officially, this is my first foamsmith prop, the Destiny Hunter Knife. I've only played Destiny a handful of times and it never really hooked me, but I wanted a small project to start with and this prop looked really cool. Can you believe this is made from a gym floor mat? It was a huge learning experience where I made a TON of mistakes and probably didn't document as well as I should have because of that. Plus I mainly followed Bill Doran's YouTube video on how to construct this prop (with a few differences), so you can check out his videos for a more in-depth look at creating foam props because he's the expert! But here was my process.

I started by getting the blueprint of the knife from punishedprops.com and it's free so anybody can go get it! I traced the pattern onto EVA foam and craft foam, glued them together with Barge, and roughly cut the shape out with a utility knife. I cut the holes with a coping saw. That was one of my first mistakes. It left a pretty jagged edge that I could never clean up that well. I should have used a forstner bit or sharpened PVC pipe as Bill suggested. Next time!


I then sanded down the remaining edges and the knife bevel with a palm sander and a Dremel. Another load of mistakes! The Dremel got a away from me on more than one occasion leaving some gouges in the foam. I just went with it and called it "battle damage." Plus the palm sander left a fine layer of foam dust all over my work area. I need better ventilation... :(


I then superglued some thin craft foam around the handle to simulate leather.


Bill used Plastidip to seal his prop. I decided to try this Rustoleum latex paint. After a few coats, it seems to be working fine.


After that, it's just paint! Silver on the blade, brown on the handle, and the spatter design on the blade.


I also airbrushed the edges of the handle to make it look like worn leather.


A little more weathering, a clear matte coat, and it's done!


Here's a look at the other side which probably has a better paint job, but I made a lot more mistakes on the fabrication of this side. This will be the side against the wall when it's on display. ;)


A closer look at the "leather" strapped handle. I'm really happy with how this turned out.


Highlighting some of the mistakes I made. To make the holes I first tried using a metal pipe from a pull-up bar, but the edge wasn't sharp enough and just left an indent in the foam. I then used the coping saw which left the jagged edge and an improperly lined up hole. I also cut the top of this a little too close because I didn't line up the craft foam on each side properly.


Here is where some of the Dremel work got away from me. Thankfully I covered most of it up with the straps but you can see the surfaces aren't exactly the smoothest.


And the top wasn't cut or sanded that that well either because of the unevenness of the sides. But it was a great learning experience for the next prop I build.


All in all, it was a ton of fun to build despite the mistakes. I knew as long as the project was small enough I wouldn't get too discouraged and follow through. This definitely builds up my confidence for another build. Thanks to Bill Doran for the great instructions!

And I still think it's pretty awesome how you can turn a gym floor mat into this. =D


And here's a link to some more pics!

26 comments:

  1. This is excellent hunting knife. It is perfect for hunting.

    ReplyDelete
  2. I like the design of the Destiny Hunter Knife. I will make this my next DIY camping gear project. I did also find some amazing tips for choosing the best hunting knife here: http://survival-mastery.com/skills/scouting/best-hunting-knife.html

    ReplyDelete
  3. The quality produces likewise guarantee their blades' against deserts and will for the most part supplant their blades immediately when sent in.https://knife-guide.webnode.com/

    ReplyDelete
  4. When he was a young farmer his arm got caught between a wide belt and a large pulley on the combine somehow he was able to get this knife out of his pocket and used it to cut the belt preventing him from bleeding to death out there in the wheat field.Meknives.com

    ReplyDelete
  5. my sister loves the tv series Ghost Whisperer but i do find it a bit distracting sometimes“ Hand Forged Knife

    ReplyDelete
  6. ROFL, that thing is so funny. Im heading to share that. Knife Maker

    ReplyDelete
  7. I like your post. It is good to see you verbalize from the heart and clarity on this important subject can be easily observed... the best electric fillet knief reviews

    ReplyDelete
  8. i never know the use of adobe shadow until i saw this post. thank you for this! this is very helpful.
    https://zartash.pk

    ReplyDelete
  9. When he was a youthful rancher his arm got captured between a wide belt and a vast pulley on the join by one way or another he had the capacity to get this blade out of his pocket and utilized it to cut the belt keeping him from seeping to death out there in the wheat field.https://creativezone.com.pk/web-development-pakistan.html

    ReplyDelete
  10. An fascinating discussion may be valued at comment. I do believe that you simply write read more about this post.it might not often be a taboo subject but normally persons are too few to dicuss on such topics. To a higher.
    zonlineshop

    ReplyDelete
  11. Your post is about knifes. It's such a amazing post. Acullay we prefers Dvds in which there are many information and new ideas about your post. Our Dvds site will be useful for you. https://www.dvdshelf.com.au/. So visit our site it may be helpful for you as there are many new ideas in our site. So visit it. Thanks for sharing such a great post.

    ReplyDelete
  12. You article is about destiny hunter knife project.We got a idea with your project .How i increase the strength of our product.http://steininger-online.de

    ReplyDelete
  13. You article is about destiny hunter knife project. Actually I am searching a site which is about bike riders costumes, So before visiting your article I have just saw a site which is very useful for those who are interested in bike riders costumes like their Jackets and Gloves. www.lycosgears.com

    ReplyDelete
  14. I found your this post while searching for information about blog-related research ... It's a good post .. keep posting and updating information. blog

    ReplyDelete
  15. I’m excited to uncover this page. I need to to thank you for ones time for this particularly fantastic read!! I definitely really liked every part of it and i also have you saved to fav to look at new information in your site. Top rated machetes

    ReplyDelete
  16. Nice post! This is a very nice blog that I will definitively come back to more times this year! Thanks for informative post. Crossbow Reviews

    ReplyDelete
  17. Well, this got me thinking what other workouts are good for those of us who find ourselves on the road or have limited equipment options. destiny 2 switch

    ReplyDelete
  18. On the off chance that you haven't been to a hobby store previously, at that point you may not realize what's in store when you stroll into one. Best Hunting and Survival Knives

    ReplyDelete
  19. Do you want to learn Knife fighting, or Knife combat? Is there a difference? You bet! Terminology often reflects philosophy for example let's take the term "Knife Fighting". Knife fighting implies struggle, when I hear the term knife fighting I often associate it with dueling. Dueling is the back and forth cat and mouse game of tag with edged weapons. This is truly not the mentality you want to have when dealing in edged weapon combat. The more you tag back and forth the more you get cut, the longer the struggle , the more likely you will be bled out and killed. This is serious business! Knife for sale

    ReplyDelete
  20. France: On the thirteenth May of this current year, four individuals were harmed and one was executed when a knife-using aggressor yelling 'Allahu akbar' assaulted them in Paris. couteau kai

    ReplyDelete
  21. Powder coating guns are a cost-effective and environmentally friendly method to make things look more attractive while also saving money. The use of dry coating while painting a device using liquid paints may be a more cost-effective option. For several reasons, the device is widely used in a wide range of industries and applications.

    ReplyDelete
  22. When it comes to soccer moms toting pocket knives, they usually favor the classic Swiss Army knife, or some knockoff thereof. knife customization

    ReplyDelete
  23. You might like the vibe of a Shun Chef knife, and furthermore like the Cutco bread knife.
    best japanese chef knife under 100

    ReplyDelete
  24. Everyday Knives- The biggest draw for knives in general is versatility. Have you ever been in a situation where you need to open a box, cut something, or just needed a sharp object? The first question in these situations is often, "Who has a knife?" best budget sashimi knife

    ReplyDelete
  25. Online games gives you an ultimate gaming experience with a realistic environment, superb graphics and sound clarity. They are absolutely relaxing and are popular among people of all ages. https://twitchviral.com/

    ReplyDelete